A cordless wet dry vacuum is a single machine that vacuums dry crumbs, mops, and recovers dirty water in one pass – and the wrong one turns a $195 unit into a stack of warranty returns. Suction, tank design and seal integrity decide a wholesale order, not marketing watts. This guide measures the UAH011LX (200W, 17,000Pa) against what distributors, hotels and private-label buyers actually need before they commit a container.
// 01 — Key takeaways
Rated suction on the UAH011LX – comfortably above the ~2,000Pa a hard floor needs and strong for everyday wet-and-dry pickup. See our Trust Center.
Runtime per charge from the 4000mAh battery, with a 4-5 hour recharge.
Separate clean- and dirty-water tanks keep recovered slurry out of the fresh supply.
Low-noise operation for hotels, offices and daytime retail cleaning.
Factory capacity since 2005 – 205 workers, 56+ countries served, 12-month warranty.
// 02 — Basics
What is a cordless wet dry vacuum?
A cordless wet dry vacuum is a battery-powered upright that suctions dry debris and washes hard floors at the same time, holding clean water and recovered dirty water in two separate tanks. It replaces a vacuum, a mop and a bucket with one pass.
One machine, three jobs
The UAH011LX vacuums, mops and self-washes its roller in a single motion. A powered brush loosens grit while the airflow lifts it into the dirty-water tank, so a sticky spill and the crumbs around it lift together.
That matters for commercial buyers. Fewer passes mean less labour per square metre, and one SKU to stock instead of three.
Why the dual-tank design matters
A wet dry vacuum keeps clean and dirty water apart. The UAH011LX carries a 750 ml clean tank and a 720 ml recovery tank, plus solid-liquid separation so hair and grit settle away from the pump.
Clean water always reaches the floor; recovered slurry never recirculates. That is the difference between washing a floor and smearing it.
// 03 — Suction
How much suction does a wet dry vacuum need?
For hard floors and everyday spills, roughly 2,000Pa is the working minimum and 10,000Pa is generous; the UAH011LX rates 17,000Pa. High-pile carpet is a different job that wants a beater-bar vacuum, not a floor washer.
Reading Pa, air watts and airflow
Pascals (Pa) measure sealed suction pressure – the pull at a blocked nozzle. Air watts (AW) combine that pressure with airflow and nozzle efficiency. The international method for measuring vacuum performance is set out in IEC 60312-1, so a Pa figure alone is only one axis of the picture.
Buy on the whole spec, not a single number. A high Pa rating with weak airflow still leaves a floor wet.
Is 17,000Pa enough for commercial floors?
Yes, for the surfaces a wet dry vacuum is built for: sealed wood, tile, vinyl, laminate and stone. At 17,000Pa the UAH011LX recovers standing spills and fine dust in one pass, which covers most hotel, cafe and retail floors.
Matching suction to floor type
Hard floors need pressure to lift water, not to dig into fibres. Industry buyer guides put sealed hard floors near 2,000Pa and deep carpet extraction above 7,000Pa. A wet dry vacuum lives in the wet-recovery lane, so its job is standing liquid and surface grit – where 17,000Pa is real headroom.
// 04 — Specifications
UAH011LX specifications
The UAH011LX is a 200W cordless wet dry vacuum with 17,000Pa suction, a 4000mAh battery rated at 40 minutes, dual 750/720 ml tanks, HEPA filtration, an LED display and a 66dB noise level, built in ABS for OEM runs.
UAH011LX spec sheet
Rev. 2026.07
| Spec | This model | Why it matters |
| Rated power | 200 W | Sustains suction and traction on wet floors |
| Suction | 17,000 Pa | Recovers standing spills in one pass |
| Battery | 4000 mAh | 40 minutes runtime; 4-5 h recharge |
| Water tanks | 750 ml clean / 720 ml dirty | Solid-liquid separation, no recirculation |
| Filtration | HEPA | Traps the fine dust the airflow carries |
| Noise | 66 dB | Daytime-safe for occupied spaces |
| Voltage | 110-220 V | One charger SKU for every market |
| Weight | 4.1 kg | Single-hand steering across long shifts |
Battery, runtime and charge time
The 4000mAh pack delivers about 40 minutes of continuous cleaning and recharges in 4-5 hours. That covers a mid-size floor plan on one charge; heavy daily users typically rotate a second unit.
Brushless-motor drive keeps output steady as the battery drains, so the last spill of a shift gets the same suction as the first.
Filtration and noise
A HEPA filter captures fine dust the airflow lifts, and the unit runs at 66dB. The US EPA defines a true HEPA filter as one that removes at least 99.97% of particles at 0.3 microns.
The EPA also notes filtration works best alongside source control and ventilation, so a sealed vacuum path matters as much as the filter grade. Read the EPA HEPA explainer for the full definition.
“We would rather ship a wet dry vacuum that recovers every drop at 17,000Pa than win a spec sheet on watts we cannot stand behind.”
— Mi Lan, Founder, Guilin Use at Home Technology Co., LTD
// 05 — Comparison
Wet dry vacuum vs traditional vacuum: which do you need?
Choose a wet dry vacuum when floors face spills, mud and daily washing; choose a traditional vacuum for deep carpet and upholstery. Most commercial hard-floor sites are better served by a wet dry vacuum, which removes a separate mopping step.
Where a wet dry vacuum wins
On sealed hard floors it clears wet and dry mess together, so staff make one pass instead of vacuuming then mopping. The dual tank means no dirty mop water dragged across a lobby. For food service and hospitality, that is faster turnaround and a visibly cleaner finish.
Where it falls short
A floor washer has no beater bar, so it will not deep-clean thick carpet the way an upright dry vacuum does. Buyers with heavy carpet should pair it with a traditional machine. Being honest about this up front prevents returns and protects your margin.
| Model | Power | Suction | Tanks (clean / dirty) | Weight | List / unit (100-unit tier) |
|---|---|---|---|---|---|
| UAH011LX Featured | 200 W | 17,000 Pa | 750 / 720 ml | 4.1 kg | $195 |
| UAH16L | 200 W | 14,000 Pa | 500 / 450 ml | 5.6 kg | $170 |
| UAH012L | 250 W | 16,000 Pa | 750 / 600 ml | 7.2 kg | $160 |
| UAH18L | 250 W | 18,000 Pa | 600 / 600 ml | 4.1 kg | $110 |
All four prices are per-unit list references at the same entry 100-unit MOQ tier; from there the UAH011LX steps from $195 down to $190 at our published higher-volume tiers, with the other models quoted on request. The premium buys the largest dual tanks in this line-up – 750 ml clean and 720 ml dirty, against 600/600 ml on the $110 UAH18L – so operators refill less often mid-shift, and at 4.1 kg it stays among the lightest to steer. The cheaper UAH18L is not a lighter-spec unit: it actually pushes higher peak suction (18,000 Pa) at the same 4.1 kg weight but carries smaller tanks, so raw budget leads there while the UAH011LX cleans more floor between tank refills.
// 06 — Manufacturing
How we manufacture this wet dry vacuum
Every UAH011LX is built in our own Guilin factory across four controlled stages – tooling, pump and PCBA burn-in, seal and vacuum testing, then compliance and warranty – under a quality system in place since 2005.
In-house tooling & molding
ABS housings are moulded on our own tooling, so a private-mould or custom-colour order does not depend on an outside vendor. Fit and finish stay consistent from first sample to last carton.
Pump & PCBA burn-in
The brushless motor, pump and control board are assembled and burned in before final build, catching early electronic failures on the line instead of in the field.
Seal-integrity & vacuum test
Each unit’s tank seals and suction path are checked so the 17,000Pa rating and the clean/dirty separation hold up under real water load, not just on paper.
Compliance & warranty
Units are built to the marks your market needs – CE, RoHS and FCC among them by destination – and ship with a minimum 12-month warranty. We name only certifications we hold; documents follow your order.
// 07 — Sourcing
Wholesale, OEM and B2B sourcing
The UAH011LX is a factory-direct wet dry vacuum for distributors, hotel groups and private-label brands: MOQ 100 units, 15-30 day lead time, and full OEM control of logo, colour, packaging and specification.
MOQ, lead time and pricing tiers
MOQ is 100 units, with trial samples in 3-7 days and bulk production in 15-30 days after deposit. Published tiers run $195 at 100, $193 at 200, $192 at 500 and $190 at 7,000 units.
Payment is 30% deposit and 70% before shipment by T/T, with Alibaba Trade Assurance supported. You lock cost and schedule before anything leaves the floor.
OEM and private-label options
Because we own the tooling, OEM and private-label runs cover your logo, custom colours, retail packaging and spec tweaks – silk-screen, hot-stamp, UV or heat-transfer branding on the housing.
That makes the UAH011LX a base for a house brand, not just a resale unit.
Shipping, payment and plug standards
The 110-220V design ships worldwide on FOB, EXW or CIF terms from South China. One voltage SKU covers every market; only the plug head changes, so you are not stocking region variants.
Export cartons run one unit each at 8.1 kg, sized 31.5×29.5×68 cm for predictable container math.
// 08 — FAQ
Frequently asked questions
How much suction does a cordless wet dry vacuum need?
Can a wet dry vacuum be used on carpet?
How long does the 4000mAh battery last per charge?
What is the MOQ, lead time and warranty?
Do you offer OEM and private-label wet dry vacuums?
Is a HEPA filter necessary on a wet dry vacuum?
// 09 — Bottom line
The bottom line for buyers
The UAH011LX is a balanced cordless wet dry vacuum: 17,000Pa suction, 40-minute runtime, dual tanks and HEPA, built factory-direct with OEM support and a 12-month warranty. It fits hard-floor commercial sites that want one machine instead of three.
Match the suction to your floors, confirm the certifications your market needs, and start with a 100-unit trial before scaling to container volume.
// Featured model
Factory-direct
UAH011LX Cordless Wet Dry Vacuum
200W · 17,000Pa · 4000mAh / 40 min · 750 ml + 720 ml tanks · 66dB · HEPA · LED
From $190/unit · MOQ 100 · 12-month warranty
// Similar products
Aspirateur Eau et Poussière, 250W, 16000Pa, Double Rouleau
Пилосос для вологого та сухого прибирання, 250W, 18000Pa, HEPA-фільтр
// Get a quote
Ready to order or need a wholesale quote?
Use At Home manufactures the UAH011LX direct from our Guilin, China factory – OEM, private-label and B2B welcome. Tell us your market and volume.
